Welcome! Blurpalicious is a social platform where you can create content and share it to the world!

User Profile @anku000

follow:


anku000's Posts

What products is the press stamping machine mainly used to manufacture?

by anku00020 days ago

The high precision pressing machine is suitable to make the terminal, stator, rotor, button, eyelet and other metal parts with high speed pressing. Widely used in LED, automobile industry, appliances manufacturing, medical apparatus and instruments, hardware & metal parts industry.

Our press stamping machine is mainly used to produce YG slider body, slider spring(for YG slider/auto-lock slider), slider puller(for YG slider/other sliders), slider needle(Y shape/C shape), iron hook, flat/middle puller, or others zipper/slider realated parts same as per customer’s requirements.

More detail visit: https://goo.gl/EZqxDu

continue reading →
1 visits | 0 Comments|Reply

Finished Invisible Zipper Process

by anku00020 days ago
Finished Invisible Zipper

Invisible zippers are a clean and nearly invisible closure commonly found on both ready-to-wear and home-sewn garments. This type of zipper is easy to install despite its professional appearance.

The Process of Making Finished Invisible Zipper

The Process Consist of Some Parts like

  • (i) Gapping
  • (ii) Melting Bottom Stop
  • (iii) Procedure Gapping & Bottom Stop Together
  • (iv) Procedure Slider Mounting
  • (v) Procedure Ultrasonic Top Stop Fixing
  • (vi) Procedure Cutting

If you do not want to do step (i) and (ii) we have Machine Called QLQ-IDGUBM Automatic Invisible Zipper Double Trimming Gapping & Ultrasonic Teeth Melting Bottom Stop M/C – MachinWill do the job for you

More detail visit: https://goo.gl/Fb3fEo

continue reading →
1 visits | 0 Comments|Reply

Long Chain Plastic Zipper Workshop

Plastic zippers mostly use polyacetal resin, though other thermoplastic polymers are used as well, such as polyethylene. Used most popularly for pencil cases, small plastic pouches and other useful stationery.

The Making Procedure

More detail visit: https://goo.gl/y6Pv2v

continue reading →
1 visits | 0 Comments|Reply

High Precision Press Stamping Machine from QLQ

by anku00023 days ago

What is a press stamping machine?

stamping press machine is a metal piece making machine used for shaping or cutting metal by deforming it with dies. The precision made male and female dies that dictate the shape of the finished products. Usually a press machine has a bolster plate, and a ram/slide. The bolster plate is mounted on top of the press bed. It is a large block of metal upon which the bottom portion of a die is clamped. The bolster plate is stationary. The ram/slide is the moving or reciprocating part that the upper die is mounted to.

How to classify press stamping machine?

A: Mechanism classification: hydraulic, mechanical, pneumatic

B: Function classification: forging presses, stamping presses, press brakes, punch press, etc.

C: Structure classification: Knuckle-joint press, screw press

D: Controllability classification: conventional, servo-presses

More detail visit: https://goo.gl/6DTgjt

continue reading →
1 visits | 0 Comments|Reply

Zinc Slider Assembly workshop

by anku00025 days ago
About Our Zinc Slider Assembly Machines

We have a lot of Zinc Slider Machines.Each and every machines are made by thinking the need of different company. if you are interested you can pick any Zipper Slider Assembly Machine from our collection. CLick Here To see the list of Slider Assembler Machines.

Those different slider Machines can make sliders from 1200-8400 Pieces Per Hour. Device inspection system for picking up the defect parts and with automatic classification of good and bad products. Machine spare parts with high precision and standardization, which are convenient for maintenance. This machines can work very stable with low maintenance cost. Normal type puller can be assembled automatically, and special pullers can be assembled semi-automatically. The slider making speed is adjustable.

If you want to buy cap and needle/monkey selector machine we also can provide.

More detail visit: https://goo.gl/5L5KkN

continue reading →
1 visits | 0 Comments|Reply

Plastic Slider Injection Workshop

by anku00027 days ago
Plastic Slider Injection Workshop

In this workshop, we have created different plastic sliders for our customers. We produce sliders of different design, size, and colors.

One of our customer’s factory

We have installed our QLQ Plastic Injection Machine it in One of our customer’s factory and the machine is running smoothly.

What Challenges We Faced?

Case 1 : Automation at Collecting Injected Moulds 

For plastic injection slider, The mould can be thrown out immediately after injection. No need to add the robot hand. You can just pick the product and send it for processing. Other injection moulds you will need robot hands to take the products out. Our is automatically thrown out. The production is more easy to handle. You can make products more easily and quickly.   

Case 2 : 100% OK Sliders

During slider production, each and every slider gets the same quality. And shines equally. Not like the front ones shines well and back ones have less shine and structural defect. Each and

continue reading →
1 visits | 0 Comments|Reply

Long Chain Metal Zipper Workshop

by anku00028 days ago
Long Chain Metal Zipper

We produce Long Chain Metal Zipper by 3 Main Procedures. Firstly we make Center Cord then Zipper tape lastly produce Long Chain Zipper.

How to Produce Long Chain Metal Zipper

(i). To Produce Center Cord,You can find the different detailes between long model and short model, We have Automatic Center Cord Making Machines for 8 Heads QLQ-CC8M Automatic Zipper Centre Cord Making Machine, 12 heads QLQ-WCCM Automatic Zipper Weaving Centre Cord Machine and 16 heads QLQ-CC16M Automatic Zipper Center Cord Making Machine. You can choose according to your requirement. You will need Yarn to make center Cord. For Center core rolling we also have QLQ-CCRM Automatic Zipper Centre Cord Rolling Machine/Bobbin Machine(6 heads with 1 motor) (ii). To Produce Zipper Tape,Firstly you will need a zipper tape wrapper, QLQ-YWM Automatic Yarn Warping Machine can match about 15sets zipper tape machine. If you are a bargainer,1) At beginning of set-up, we suggest you to buy the zipper

continue reading →
1 visits | 0 Comments|Reply

Finished Invisible Zipper Workshop

by anku00029 days ago
Finished Invisible Zipper

Invisible zippers are a clean and nearly invisible closure commonly found on both ready-to-wear and home-sewn garments. This type of zipper is easy to install despite its professional appearance.

The Process of Making Finished Invisible Zipper

The Process Consist of Some Parts like

  • (i) Gapping
  • (ii) Melting Bottom Stop
  • (iii) Procedure Gapping & Bottom Stop Together
  • (iv) Procedure Slider Mounting
  • (v) Procedure Ultrasonic Top Stop Fixing
  • (vi) Procedure Cutting

If you do not want to do step (i) and (ii) we have Machine Called QLQ-IDGUBM Automatic Invisible Zipper Double Trimming Gapping & Ultrasonic Teeth Melting Bottom Stop M/C – Machine Will do the job for you

1. Gapping:We use QLQ-IDGM Automatic Invisible Zipper Double Trimming Gapping M/C – Machine (long model) Machine for Gapping. 

QLQ-IDGM Automatic Invisible Zipper Double Trimming Gapping M/C – Machine (long model) This machine adopts double side hooked needle locating, so that there is

continue reading →
1 visits | 0 Comments|Reply

Metal Zipper Plating Process

by anku0001 month ago

Anything that you will need to produce the zipper or slider, you can just find our QLQ to get professional guidance and support based on our 20 years of experience in zipper manufacturing.

Our time is a single templating machine. Every time we make this product for customers, we test it at least three days with effective empathy learning. Where we try to think what would be our customer’s experience or opinions during operating the machine Which helps us to Make that product very smooth, user-friendly and safe for the customers when they receive the machine.

The process

The following diagram shows a summary of how the Metal Zipper (Brass Material) goes through different processes.

More detail visit: https://goo.gl/QdkmEF

continue reading →
1 visits | 0 Comments|Reply

Slider Plating Workshop(Barrel Plating)

Why Slider Plating ?
  • (i) Final product is cosmetically pleasing
  • (ii) Can be plated in either clear, yellow, black, olive drab, and many other dyed colors
  • (iii) Finish is uniform and very bright

There are two techniques of plating metal sliders: 

1. Electroplating 2. electroless nickel plating. 3. Painting

1. Electroplating:Electroplating method is using electrical current and the process is called electrodeposition, where the cathod is the object to be plated and the anode is made from the metal to be plated on the object. Alloys like brass and solder can be electrodeposited.

The tough step in this process is the uniform thickness of the layer, especially if the object to be plated has a complex shape or is a very bad electrical conductive. Though, the complex geometry issue, can be solved by using more anods or a special form anod which copies the geometry to be plated.

2. Electroless Nickel PlatingElectroless nickel plating is an auto-catalytic chemical method which is

continue reading →
1 visits | 0 Comments|Reply
[]