Welcome! Blurpalicious is a social platform where you can create content and share it to the world!

User Profile @afastainlesskb

follow:


afastainlesskb's Posts

Stainless Steel Handmade Sink Manufacturers Share The Advantages Of Manual Tanks

Today, Stainless Steel Handmade Sink Manufacturers is here to talk to you about the various features of machine slots and manual slots:First, from the appearance, the integrated groove is more round, the manual groove is thicker and the line is tough.Second, the details, the integrated groove four corner arc processing, usually easy to use, the rounding of the manual groove is not perfect compared to the machine groove. The bottom of the integrated tank can make a large slope, which is more conducive to the launching of water. The manual tank can only make a simple X-type launching.Third, the material is almost no difference, if you use 304 stainless steel, the difference lies in the thickness, the general machine slot thickness is about 1mm, and the manual slot market can generally achieve about 3mm, or even the custom-made 5mm manual Slot, this is the advantage of the manual groove looks more solid and more personal.Fourth, the appearance of the machine slot and manual slot, this is

continue reading →
1 visits | 0 Comments|Reply

Stainless Steel Handmade Sink Manufacturers Introducing The Process Of Replacing The Sink

The sink is a kind of thing that everyone needs to decorate in the kitchen. Nowadays, there are many sinks on the market that claim to be of good quality, but many of them are substandard products, and there are very few good products. In this case, the replacement of the sink is particularly important. Today, Stainless Steel Handmade Sink Manufacturers will give you a detailed introduction to the specific steps of changing the sink.1. Single-seat faucet: Generally there are two screws passing through the sink directly underneath. The two screws are very tight, and may be blocked by the inlet pipe. You can know the position by touching the hand. The two-seat has two larger bolts that secure the faucet on both sides of the base.2. Remove the faucet and look at the location of the sink. Many homes are now double sinks, single-seat faucets, two long screws may be sandwiched between the two sinks, making the wrench difficult to move, in this case people need to supine with the screw direct

continue reading →
2 visits | 0 Comments|Reply

Stainless Steel Handmade Sink Manufacturers Share How To Choose A Sink

Today, Stainless Steel Handmade Sink Manufacturers share how to have a quality sink, a truly good sink that should have the following advantages:

1. Less blockage.Different from the traditional twists and turns, the winding pipe around the winding, the modern straight row water design is more smooth, and the special design of the deodorant cover, the water seal design to prevent odor~2. Emissions are fast.The sink also increases the volume, and the nanotechnology garbage blue treatment not only speeds up the water, but also prevents bacteria from breeding!3. Large space.The extra large space makes the dish washing more comfortable, and the iron pan steamer can hold it! No need to worry about washing the pot, it’s all over the water~4. Save space.Reasonable design of the product structure, no dead angle cleaning is more convenient, a touch is clean. The materials are made of 304 stainless steel, which is environmentally friendly and durable!

information about Stainless Steel Handmade

continue reading →
2 visits | 0 Comments|Reply

Installation Height Of Stainless Steel Laundry Cabinet

The laundry cabinet is one of the sanitary ware products commonly used in modern home life. The installation of the laundry cabinet is professional, and generally requires professional installation. Be sure to pay attention to the following points during the installation of Stainless Steel Laundry Cabinet :1. confirm the installation position of the laundry cabinet: Before laying the floor tiles and wall tiles, it is necessary to confirm the installation position of the laundry cabinet. Since the installation of the laundry cabinet is to be fixed on the wall with strong glue, the water inlet hole is also needed. And the drain hole, once installed, generally can not move the position, so confirm the installation position of the laundry cabinet is a prerequisite before installation.2.when purchasing the laundry cabinet, confirm the shape and size of the laundry cabinet according to the installation location: After the position of the laundry cabinet is determined, the shape and size of t

continue reading →
2 visits | 0 Comments|Reply

Stainless Steel Handmade Sink Manufacturers Share How To Choose A Quality Sink

Because stainless steel sinks have always been the mainstream, Aberdeen Stainless Steel Handmade Sink Manufacturers analyzes the advantages and disadvantages of stainless steel kitchen sinks here.1. Fake 304 stainless steel.Many people know that 304 stainless steel products are more suitable for home kitchens. The corresponding 201 or 202 material is much worse in corrosion resistance and rust resistance. There is also a kind of 316 food grade stainless steel, which is used more in public facilities and relatively less in households. It will not be described in detail here. As a factory, I can see a lot. Some foreign trade products, especially the sinks of some world brands, never have to be marked with 304 material on the sink. .Customers who are generally not very knowledgeable, think that there is a 304 mark on the right. In fact, these are fake, it is 201, 202 or stainless steel sink. Don't think that people tell you that 304 is really 304 material. The only sign that can be determ

continue reading →
2 visits | 0 Comments|Reply

Handmade Sink Manufacturers Bring An Easy Way To Remove Dirt From The Sink

We all know that the stainless steel sink in the house will use more or less dirt after a period of use, especially the oil, which makes it difficult for many friends to clean it, and it is not clean enough. Don't worry, the handmade sink manufacturers are given below. Everyone brings two small tricks to make it easy to remove the dirt from the stainless steel sink.

The first little trick:You can use the filament to hold the filter box inside to prevent the vegetable chips and fine residue from blocking the water pipe. In addition to cleaning the filter cartridge every time you clean, remember to combine the neck end of the tube behind the filter cartridge. Cleaning, so as not to accumulate more and more grease in the long-term accumulation, become the breeding of the bee stings. The pool often has a layer of oil, you can use the core to scrub the grease. This is because the fruit has a fruit limb. Pectin has the effect of removing oil and dirt. Or, grab a fine salt. Evenly withdrawn

continue reading →
2 visits | 0 Comments|Reply

Kitchen Faucets Manufacturers Tell You How To Install In Stainless Steel Faucet

Although Stainless steel faucet is small, it is indispensable in all aspects. The structure of Stainless steel faucet seems to be extremely simple, but it still takes some effort to install the faucet flawlessly. So, how to install the rusty steel faucet? Let's take a look at the installation method in Stainless steel faucet with kitchen faucets manufacturers . First, prepare the installation tools, and check whether the supporting parts are complete before installation. Common faucet parts include: hose, rubber washer, shower head, water removal, cripple], decorative cap, etc. Different Stainless steel faucet styles and methods are different, so learn the following four installation methods for Stainless steel faucet: 1. Installation of single-hole basin faucetWhen purchasing a single-handle basin faucet, you should pay attention to the diameter of the water outlet. At present, most of the water in the market is supplied by hard pipes. Therefore, you should pay attention to the height

continue reading →
2 visits | 0 Comments|Reply

Kitchen Faucets Manufacturers Tell You The Knowledge Of The Tap

Generally, when the faucet is broken and leaking at home, you should use the correct method to repair it. Today, follow Afa kitchen faucets manufacturers to see how to properly repair the faucet.

First, 502 glue and cling film this method is not credibleAt first, it was sealed with plastic wrap several times, but the faucet was still leaking/water seepage. After the test 502, although blocked, a boiling water will collapse the 502 blocked mouth.

Second, The correct method of repair should be to replace the faucet.1. Screw on the cold water hot water switch and do not leak water during repair.2. Unscrew the water pipe and let off the mixture of rust and scale and water.3. Unscrew the plastic knob and remove the faucet.4. Clean the water and install a new tap.5. Testing. Reopening the faucet reveals that there is no water leaking and the surface has been completely repaired.

information about kitchen faucets manufacturers : https://www.afastainlesskb.com/product/stainless-steel-faucet

continue reading →
2 visits | 0 Comments|Reply

Stainless Steel Faucets Manufacturer To Bring You More Knowledge Of Taps

Water plays an important role in our lives. It is the source of life and one of the most important material resources for human survival and development. Water security is also a concern of people.

As an important export of household water, faucets are essential parts for every household. How to choose a reliable and safe faucet?

MaterialNowadays, there are many faucets on the market, such as all-plastic, ceramic, stainless steel, copper-containing, etc. In addition to the simple process of PVC faucets, the other three materials are more common.

Although the faucet containing copper or copper is slightly higher in relative price, it is more popular in the market because of its antibacterial nature and stability.

  1. SpoolThe valve core is an important part to determine the experience of the faucet. The better faucets on the market are generally made of ceramic valve cores, which are heat-resistant and wear-resistant and can be suitable for all water environments in the home. Moreover
continue reading →
1 visits | 0 Comments|Reply

Procedure For Disassembling Stainless Steel Faucets

The procedure for disassembling the stainless steel faucets is:1. Turn off the main switch. Find the red and blue dots under the handle. When you open it by hand, a small hole is revealed.2. observe the hole in the hole by hand, see if a fixed screw inside is a cross or a word, use a corresponding screwdriver to loosen it. The screw of a few brands is the inner square hole, which is more troublesome. When there is no tool, be careful not to damage the screw port with other alternative tools that can be removed.3. When you loosen the screw, you can remove the handle.4. At this time, you can see a large copper nut. After removing the nut with a large movable wrench, you can remove the spool of the faucet.5. Observe whether the copper plane under the valve core is uneven or has fine sand particles and clean it. Remove the rubber seal on the flat surface to see if it is damaged.6. Generally speaking, the hot and cold faucet has good integrity and high reliability. Therefore, after opening,

continue reading →
1 visits | 0 Comments|Reply
[]